home > support > Macintosh PPP Setup NOTE: Before you can use OT/PPP, you must first set up these three control panels: Modem, TCP/IP, and PPP. To configure the modem control panel: 1. Select Control Panels then Modem from the Apple menu. 2. Connect via: Select "Modem" unless you are using your Printer Port. 3. Next to Modem select your modem from the list. If your modem is not listed, try "Null Modem 19200" for a 14.4 modem, "Null Modem 57600" for a 28.8, 33.6, or x2 modem. 4. Select the appropriate Sound (on or off) and Dialing setting (tone or pulse). 5. Close the modem control panel. To configure the TCP/IP control panel: 1. Connect via: Select "PPP". 2. Configure: Select "Using PPP Server". 3. Name server addr.: Leave Blank. 4. Implicit Search Path / Starting domain name: Enter "SolidWeb.com" in this field. 5. Ending domain name: Leave this field blank. 6. Additional Search domains: Enter "SolidWeb.com" in this field. 7. Close the TCP/IP control panel. To configure the PPP control panel: 1. In the Connection area, select "Registered User". 2. Name: Enter your login name. 3. Password: Enter your password. Click the Save password box. To find your local access number, please select your State: Alabama Alaska Arizona Arkansas California Colorado Connecticut District of Columbia Delaware Florida Georgia Hawaii Idaho Illinois Indiana Iowa Kansas Kentucky Louisiana Maine Maryland Massachusettes Michigan Minnesota Misssissippi Missouri Montana Nebraska Nevada New Hampshire New Jersey New Mexico New York North Carolina North Dakota Ohio Oklahoma Oregon Pennsylvania Rhode Island South Carolina South Dakota Tennessee Texas Utah Vermont Virginia Washington West Virginia Wisconsin Wyoming   4. Click CONNECT if you wish to begin dialing. If you want to connect at a later time, proceed to the next step. 5. Close the PPP control panel. 6. Click SAVE in the dialog box. You are now ready to connect to SolidWeb! Products | Support | About Us | Contact Us  © 1998-2004 Solid Technology, Inc. All rights reserved.